Flavour carriers
Flavour raw materials like essential oil and CO₂ extract are very strong. They are often added to food in a carrier. The carrier dilutes the flavour. It allows blending into the oily or watery part of the product. Three forms are common: oil-soluble flavour (mostly in MCT oil), water-dispersible flavour (lecithin emulsion), and flavour dissolved in triethyl citrate (TEC). The choice depends on where the product carries the flavour: in oil, in water, or in alcohol.
What does a carrier do?
Essential oil dissolves poorly in water, so it does not mix evenly. Essential oils consist of fat-loving molecules. Aniseed spirit shows this clearly. Anethole dissolves in alcohol. When water is added, it separates and forms micrometre-sized droplets. This causes the spirit to turn cloudy [1]. Distributing a tiny amount of a strong oil evenly across a large lot is also hard. A carrier makes weighing, mixing, and dosing easy.
Carriers are defined in regulations. In the European Union, additives and carriers permitted in flavourings are listed in Annex III, Part 4 of the additives regulation. Lecithin (E322) can be used in all flavourings as needed (quantum satis). TEC (E1505) can also be used in all flavourings. There is a legal maximum limit for TEC in finished food [2]. MCT oil is an increasingly common fat in food, pharmaceuticals, and cosmetics [3].
Where does oil-soluble flavour go?
Into fat-bearing products: chocolate, fillings, confectionery, chewing gum, bakery goods, and ice cream. In these products, the flavour disperses in the fat phase. MCT stands for medium-chain triglycerides (triglycerides are the building blocks of fats). It consists mostly of caprylic (C8) and capric (C10) fatty acids [3]. These fatty acids are saturated (their chains have no double bonds) and resist oxidation by air [4]. In a mayonnaise study, mixtures with MCT mayonnaise developed fewer peroxides, the primary products of oxidation [4].
The type of fat changes how flavour is perceived. Fat holds on to fat-loving flavour compounds. The fat type and how strongly the compound prefers fat determine how much flavour is released [5]. If oil-soluble flavour is added to water, it will not mix. The oil collects on the surface and the flavour disperses unevenly.
What is a water-dispersible flavour?
Small oil droplets suspended in water. A water-dispersible flavour is an emulsion. The flavoured oil stays suspended as fine droplets in water. An emulsifier keeps the oil and water together and prevents droplets from merging. Lecithin is one example. Adding soy phosphatidylcholine, the main component of lecithin, to a caraway oil emulsion notably increased stability [6]. Water-dispersible flavour suits watery products like beverages, syrups, and dairy drinks.
The name "water-dispersible" is exact: the flavour does not dissolve in water, it disperses. Therefore, the appearance of a water-dispersible flavour is milky white or cloudy. This is not a sign of spoilage. The appearance of cloudy beverages comes from this kind of emulsion. The emulsion provides both flavour and colour. It is prepared as a concentrate and diluted into the beverage [7]. If droplets are made very small, the emulsion can look clear. For this, the droplet radius must be below 100 nanometres [8].
Why shake water-dispersible flavours and store them cool?
Emulsions separate over time. Shaking redistributes the droplets. Cool storage slows down phase separation.
Droplets float upward. Oil droplets are lighter than water and rise slowly to the surface, just like cream on milk. This is called creaming. If droplets are heavier than water, they sink instead [9]. In beverage emulsions, weighting agents are added to match the density of water. Ester gum from pine resin and SAIB from sugar are examples [9].
Small droplets migrate to larger ones. Essential oils dissolve slightly in water. Molecules move from small droplets into water and then into large droplets. This makes droplets grow, a process called Ostwald ripening. In lemon oil emulsions, droplet growth accelerated at higher storage temperatures. The most concentrated lemon oil remained stable against growth [10]. In one study, mixing triglyceride oil into orange oil slowed droplet growth [11]. Cool storage under the conditions in the technical data sheet protects the emulsion longer (see shelf life and storage).
When is TEC used?
In alcoholic products. TEC is triethyl citrate, an ester made from citric acid and ethanol. An ester forms by combining an acid with an alcohol. It mixes with alcohol in all proportions. It has limited solubility in water and vegetable oil. Therefore, flavour dissolved in TEC disperses most easily in alcoholic products.
Which one to choose?
Look at the phase of the product that carries the flavour. If the flavour is carried in fat, choose an oil-soluble flavour. If carried in water, choose a water-dispersible flavour. For alcoholic products, flavour dissolved in TEC is also suitable. The carrier is stated in the composition line of the technical data sheet (TDS) (see TDS, SDS, and CoA).
| Carrier | Where flavour mixes | Example product | Caution |
|---|---|---|---|
| Oil-soluble (MCT) | oily phase | chocolate, fillings, confectionery, gum, bakery, ice cream | separates when added to water |
| Water-dispersible (lecithin and water) | watery phase | beverage, syrup, dairy drink | cloudy appearance, shake before use, keep cool |
| Dissolved in TEC | alcoholic phase | alcoholic beverage | limited solubility in water and oil |
References
- Scholten E., van der Linden E. et al. (2008). The Life of an Anise-Flavored Alcoholic Beverage: Does Its Stability Cloud or Confirm Theory?. Langmuir. https://doi.org/10.1021/la702186g
- European Parliament and Council (2008). Regulation (EC) No 1333/2008 on food additives, Annex III, Part 4 (food additives including carriers in food flavourings) and Part 6, Table 1 (consolidated version 23.04.2024). Official Journal of the European Union. https://eur-lex.europa.eu/eli/reg/2008/1333/oj
- Traul K., Driedger A. et al. (2000). Review of the toxicologic properties of medium-chain triglycerides. Food and Chemical Toxicology. https://doi.org/10.1016/s0278-6915(99)00106-4
- Raudsepp P., Brüggemann D. et al. (2014). Oxidative stabilization of mixed mayonnaises made with linseed oil and saturated medium-chain triglyceride oil. Food Chemistry. https://doi.org/10.1016/j.foodchem.2013.11.141
- Relkin P., Fabre M. et al. (2004). Effect of Fat Nature and Aroma Compound Hydrophobicity on Flavor Release from Complex Food Emulsions. Journal of Agricultural and Food Chemistry. https://doi.org/10.1021/jf049477a
- Bylaite E., Nylander T. et al. (2001). Emulsification of caraway essential oil in water by lecithin and β-lactoglobulin: emulsion stability and properties of the formed oil–aqueous interface. Colloids and Surfaces B: Biointerfaces. https://doi.org/10.1016/s0927-7765(00)00212-5
- Klein M., Aserin A. et al. (2010). Enhanced stabilization of cloudy emulsions with gum Arabic and whey protein isolate. Colloids and Surfaces B: Biointerfaces. https://doi.org/10.1016/j.colsurfb.2010.01.008
- McClements D., Rao J. (2011). Food-Grade Nanoemulsions: Formulation, Fabrication, Properties, Performance, Biological Fate, and Potential Toxicity. Critical Reviews in Food Science and Nutrition. https://doi.org/10.1080/10408398.2011.559558
- Chanamai R., McClements D. (2000). Impact of Weighting Agents and Sucrose on Gravitational Separation of Beverage Emulsions. Journal of Agricultural and Food Chemistry. https://doi.org/10.1021/jf0002903
- Rao J., McClements D. (2012). Impact of lemon oil composition on formation and stability of model food and beverage emulsions. Food Chemistry. https://doi.org/10.1016/j.foodchem.2012.02.174
- Park S., Hong C. et al. (2020). Prevention of Ostwald ripening in orange oil emulsions: Impact of surfactant type and Ostwald ripening inhibitor type. LWT. https://doi.org/10.1016/j.lwt.2020.110180