Taxifolin
Taxifolin is a flavonoid, also called dihydroquercetin. It belongs to a family of color and defense compounds common in plants. It is found in onion, milk thistle, and pine bark [1]. Industrially, it is obtained from larch wood, such as Siberian larch (Larix sibirica) and Dahurian larch (Larix gmelinii) [2]. Its purified form is a white to pale yellow powder [3]. Supplement and cosmetic manufacturers use this powder in their formulas.
How much is in larch?
Taxifolin accumulates in the wood of the tree. Measured levels in wood reach a few percent.
Which part of the tree. Taxifolin accumulates most in heartwood at the base of the trunk. Heartwood is the inner, dark wood of the tree. A measurement in Dahurian larch found 2.8% in heartwood [4]. The ratio is lower in bark and sapwood. Sapwood is the outer, light wood. The level is higher in older trees and latewood formed at the end of summer. Latewood measured 2.1%, while earlywood measured 1.4%.
What comes with it. Larch wood also contains arabinogalactan alongside taxifolin. Arabinogalactan is a polysaccharide sugar chain. One study extracted both together using water and ethanol. The study obtained 3.7% taxifolin from wood [5]. Commercial taxifolin is produced by water and ethanol extraction followed by chromatographic purification [2]. Chromatography separates compounds from each other.
Taxifolin and quercetin: what is the difference?
Taxifolin and quercetin are closely related molecules. Taxifolin is quercetin with two added hydrogen atoms. The name dihydroquercetin comes from those two hydrogen atoms [2].
| Compound | CAS | Formula | Molar mass (g/mol) | XLogP | PubChem |
|---|---|---|---|---|---|
| Taxifolin | 480-18-2 | C₁₅H₁₂O₇ | 304.3 | 1.5 | 439533 |
| Quercetin | 117-39-5 | C₁₅H₁₀O₇ | 302.2 | 1.5 | 5280343 |
Solubility. Taxifolin dissolves poorly in water. It dissolves well in mixtures of water and alcohol. At room temperature, it dissolves at about 1 mg/mL in water [2]. Its XLogP value is 1.5. The molecule does not strongly prefer oil or water.
Two forms. Taxifolin has two spatial configurations: trans and cis. The trans form dominates in commercial larch extract. In the extract evaluated by EFSA, at least 98% of taxifolin is trans and at most 2% is cis [3].
What is it used for?
Supplement
Taxifolin is used as a capsule and tablet ingredient in supplements. Studies have tested it for weight, mental fatigue, and age-related cognitive decline.
Safety assessment. Its use in supplements underwent a safety assessment in Europe. EFSA found larch extract containing at least 90% taxifolin safe in supplements and certain foods [3].
Weight. In one study, subjects taking taxifolin lost more weight than non-users. In this retrospective study, 36 patients took 300 mg taxifolin daily for about six months. This group lost an average of 1.6 kg. The 26 patients not taking taxifolin lost 0.3 kg. No side effects were observed [6].
Cognitive function. Taxifolin was tested for mental fatigue and age-related cognitive decline. Sixteen patients with mild cognitive impairment or mild dementia took 300 mg taxifolin daily. Cognitive test scores were better preserved during the taxifolin period than before [7]. In a placebo-controlled study on healthy young adults, a single dose of taxifolin in food improved mental arithmetic. It also reduced perceived mental fatigue [8].
Cosmetics
Taxifolin is an active ingredient in anti-aging skin creams.
Skin elasticity. A taxifolin cream made skin more elastic in one month. In this study, 20 out of 60 women aged 35 to 61 used a 3% taxifolin cream for 30 days. The cream increased skin elasticity on the cheek and eye area. The cream base (placebo) did not change elasticity. Patch tests on 35 volunteers showed no irritation [9].
Pure powder or complex: which form?
Taxifolin is available as purified powder or as water-soluble complexes.
| Form | How it is obtained | Taxifolin content | What comes with it |
|---|---|---|---|
| Larch wood | Raw material | A few percent | Arabinogalactan |
| Purified taxifolin | Water and ethanol extraction, chromatography | At least 90% (dry weight) | Moisture |
| Complexed and encapsulated forms | Pure taxifolin processed with lecithin, cyclodextrin, or starch derivative | Depends on carrier | Carrier material |
Purified powder. Market powder is largely pure taxifolin. In five lots evaluated by EFSA, taxifolin measured between 92.2% and 92.6% on dry weight [3].
Complexes. Complex forms dissolve more easily in water. Complexes with lecithin and beta-cyclodextrin increased the dissolution rate of taxifolin [10]. Lecithin is a lipid substance in soy and egg. Beta-cyclodextrin is a cyclic sugar from starch. Microcapsules spray-dried with a starch derivative and maltodextrin improved stability and solubility [11].
Calculation example. Required powder amount is calculated based on purity. Clinical studies administered 300 mg taxifolin daily [6]. At 90% purity, about 333 mg powder is needed for this amount. Figures are examples. For comparison, calculate the price per kilogram of pure taxifolin rather than the price per kilogram of powder.
How to read the certificate of analysis?
Method. Taxifolin content is measured by liquid chromatography. The method used is HPLC [3]. It separates substances in the mixture and measures each individually.
Dry weight. Purity is stated on a moisture-free basis. In the EFSA definition, moisture is at most 10% [3]. In high-moisture powder, the as-is taxifolin content is lower than the dry-weight purity. The loss on drying line shows this difference.
Specification and measured value. The technical data sheet gives the specification, such as "at least 90%". The certificate of analysis (CoA) gives the measured value of that lot, such as "92.4%". Read both on separate lines.
What indicates quality?
Heavy metals. Limits for lead, arsenic, cadmium, and mercury appear in the technical data sheet. Measured values in lots evaluated by EFSA were far below the limits [3].
Raw material tests. Wood is an agricultural and forestry product. Tests for pesticides, aflatoxins, ochratoxins, and PAHs appear in raw material reports. Ochratoxins are mold toxins. PAHs are combustion contaminants.
Microbiology. The technical data sheet includes microbiology parameters. These are total aerobic bacteria, yeast and mold, E. coli, Salmonella, Staphylococcus aureus, and Pseudomonas [3].
How does it behave in formulation?
Dissolution rate. Dissolution rate is important in liquid formulations. Complex forms speed it up. Anhydrous powder converts to a hydrated crystal form upon contact with water [12].
pH. Taxifolin is prone to degradation in alkaline formulations. When pH rises from 4.5 to 8, the cis form converts to the trans form [2].
Absorption. Nano-sized taxifolin is absorbed better. In rats, oral absorption of plain taxifolin was 0.5%. It rose to 0.8% with nanodispersion [13]. In another study, nanoparticle taxifolin absorption increased sevenfold [14].
Storage. Store in sealed, full containers in a cool and dark place.
Safety document. Follow handling and personal protection instructions in the safety data sheet (SDS).
References
- Sunil C., Xu B. (2019). An insight into the health-promoting effects of taxifolin (dihydroquercetin). Phytochemistry. https://doi.org/10.1016/j.phytochem.2019.112066
- Filippovich S., Isakova E. et al. (2025). Modern Developing Directions in the Dihydroquercetin Study. Molecules. https://doi.org/10.3390/molecules30214187
- Turck D., Bresson J. et al. (2017). Scientific Opinion on taxifolin-rich extract from Dahurian Larch (Larix gmelinii). EFSA Journal. https://doi.org/10.2903/j.efsa.2017.4682
- Liu Z., Jia J. et al. (2014). Development of an Ionic Liquid-Based Microwave-Assisted Method for the Extraction and Determination of Taxifolin in Different Parts of Larix gmelinii. Molecules. https://doi.org/10.3390/molecules191219471
- Ma C., Yang L. et al. (2014). Ultrasound-Assisted Extraction of Arabinogalactan and Dihydroquercetin Simultaneously from Larix gmelinii as a Pretreatment for Pulping and Papermaking. PLoS ONE. https://doi.org/10.1371/journal.pone.0114105
- Hattori Y., Nakaoku Y. et al. (2025). Taxifolin as a Therapeutic Potential for Weight Loss: A Retrospective Longitudinal Study. Nutrients. https://doi.org/10.3390/nu17040706
- Hattori Y., Saito S. et al. (2023). Taxifolin for Cognitive Preservation in Patients with Mild Cognitive Impairment or Mild Dementia. Journal of Alzheimer's Disease. https://doi.org/10.3233/jad-221293
- Shinozaki F., Kamei A. et al. (2023). Ingestion of taxifolin-rich foods affects brain activity, mental fatigue, and the whole blood transcriptome in healthy young adults: a randomized, double-blind, placebo-controlled, crossover study. Food & Function. https://doi.org/10.1039/d2fo03151e
- Micek I., Nawrot J. et al. (2021). Taxifolin as a Promising Ingredient of Cosmetics for Adult Skin. Antioxidants. https://doi.org/10.3390/antiox10101625
- Zhang Y., Yu J. et al. (2017). Research on Characteristics, Antioxidant and Antitumor Activities of Dihydroquercetin and Its Complexes. Molecules. https://doi.org/10.3390/molecules23010020
- Liu B., Sun J. et al. (2025). Preparation of dihydroquercetin microcapsules with sodium starch octenyl succinate and maltodextrin as wall materials to improve stability, solubility and bioaccessibility. Food Chemistry. https://doi.org/10.1016/j.foodchem.2025.146072
- Stenger Moura F., Pinna N. et al. (2021). Exploring Taxifolin Polymorphs: Insights on Hydrate and Anhydrous Forms. Pharmaceutics. https://doi.org/10.3390/pharmaceutics13091328
- Yang C., Wang Z. et al. (2016). UHPLC-MS/MS Determination, Pharmacokinetic, and Bioavailability Study of Taxifolin in Rat Plasma after Oral Administration of its Nanodispersion. Molecules. https://doi.org/10.3390/molecules21040494
- Zu Y., Wu W. et al. (2014). Enhancement of solubility, antioxidant ability and bioavailability of taxifolin nanoparticles by liquid antisolvent precipitation technique. International Journal of Pharmaceutics. https://doi.org/10.1016/j.ijpharm.2014.05.049